EMF LOGO
Magnetic Equipments : Small Magnets, General Purpose Block Magnet, Magnetic Tubes, Hand Magnetic Probe, Fork Lift Magnet, Drawer and Housing magnet, Bullet Magnet, Magnetic Grates, Pipeline Magnets, Magnetic Hump, Magnetic Plates, Magnetic Pulleys, Suspension Magnet, Lifting Magnet, Magnetic Drum Seperators, Overband Magnetic Meparators, Permanent Magnetic, roll separators, Gauss Meters, Electro Magnetic Over Band Separator (Oil Cooled), Electro Magnetic Over Band Separator (Air Cooled), Electro Magnetic Pulley, Electro Suspension Magnet (Oil Cooled), Electro Suspension Magnet (Air Cooled), Electro Magnetic Drum Separator, Circular Lifting Magnet, Rectangular Lifting Magnet
Vibrating Equipments : Gyratory Screen, Linear Motion, Banana Style Vibrating Screen, Dewatering Vibrating Screen, Circular Motion Vibrating Screen, Vibro Conveyor, Inclined Vibro Grizzly Feeder, Electro Mechanical Feeder, Electro Magnetic Feeder, Vibration Tables, Vibratory Motor,Bin Vibrator, Chute Vibrator, Pneumatic Vibrator, Foundry Knock outs, Electro Mechanical Feeder, Banana Style Vibrating Screen, Circular Motion Vibrating Screen, Vibratory Motor, Inclined Vibro Grizzly Feeder,Vibration Tables, Bin Vibrator, Vibro Conveyor, Dewatering Vibrating Screen                                                                                                                                                                                                 


Pulley

   

The ELECTRO MAGNETIC FLUX electro Magnetic Pulleys Separator are ideally used as head pulleys in belt conveyor systems to improve the purity of product and to protect the process equipment from tramp metal damage. The pulley provides continuous, effective to removal of ferrous metal from the product flow.

This method of ELECTRO MAGNETIC ferrous metal separation requires that the magnetic pulley be installed at the discharge end of the conveyor replacing the existing pulley. As the mixture of product and ferrous metal travels over the magnetic head pulley and reaches the drop-off point, A divider plate can be installed to ensure that no remixing occurs when product falls freely from the end of the line into storage bins or processing chutes. Any ferrous metal that is mixed in with the product is attracted and held to the face of the belt and carried to the underside of the pulley
This type of separation acts as secondary protection for deeply embedded metal in the product, which may have not been initially extracted by other process of an overhead suspension magnet

Applications:

pit coal, coke, lime-stone, cement, rock salt, potash,  chamotte, blast furnace and steel mill slag, foundry sand, gravel, sand, synthetic granulates, grain and feedstuff. They can also be fitted as drive or return pulleys to the discharge end of rubber conveyor belts of existing installations at a later stage.

The ELECTRO MAGNETIC FLUX electro Magnetic Pulleys Separator are mainly designed to remove large iron pieces, such as bolts, screws, wire, strips and tools which could damage conveyor belts, brake sieves, crushers or processing machines
Other types of separating magnets are available for separating fine iron. In the event of slag separation they serve - depending on the granulation - for parting magnetic and non-magnetic components.

We offer a full range of magnetic pulleys for compatibility with conveyor systems used in today's applications .Pulleys are sized based on application evaluation. (i.e. belt width, belt speed, burden depth, size of recoverable ferrous. .)

 

Emf  electro Magnetic Pulleys consist of a magnet body and exciter coil. Cross sections, shape and size of the magnet body are specially designed for magnet coil and power input. Thus despite compact construction, low weight and low power input, high efficiency is reached.

The COIL –( Double Fiber glass wound –electrical grade)
 magnet body is a welded steel construction of high permeability. The standard exciter coil consists of an aluminium conductor and it is manufactured by using insulating material of class `H' and mounted into the magnet body. If specially requested we can also supply coils wound with copper conductor. The coil is covered by a non-magnetic plate

 

RANGE OF APPLICATION

Note : The design, dimensions and specifications are subject to alterations without prior notice due to constant development for better performance

 

 
Electro Magnetic Flux Industries 2006 - 2008.  |   All Rights Reserved |  DOMAIN2HOST