Equipments : ||
Equipments : ||
Emf - Standard Magnetic Drum Separators are manufactured
of stainless steel and have cleats to aid in
pulling tramp metal through and out of the magnetic
field. Drum magnets are ideal for the continuous
removal of tramp and fine ferrous contamination
from dry bulk material used in the processing
of foods chemicals minerals and any similar
product type. The drum should be fitted at the
conveyor discharge or ideally direct below a
vibratory feed system. High performance Rare
Earth neodymium magnets are incorporated within
a stainless steel wear resistance drum shell.
The drum shell s supported on high quality sealed
flange bearing to ensure smooth efficient and
reliable rotation of the shell around the magnetic
Maximize Recovery of Ferrous
High performance magnet design to suit your
application (ferrite, rare earth or electro)
to provide the most effective and efficient
method of metal recovery.
High Performance Rare Earth magnets
are incorporated within a stainless steel wear
resistance drum shell. Permanent magnet drums
are built using high intensity non-deteriorating
material, so not only is no power required to
the magnet, but it will also provide maximum
magnetic force for the lifetime of the machine.
High permeability iron circuit to minimize stray
magnetic fields in shaft and bearings thus prolonging
High intensity Deep field magnet
systems penetrate through the product burden
and Extract the maximum amount of ferrous metal.
This allows for a higher throughput of material
to be separated efficiently.
We offer a complete range of Drum
Magnets (Non-Deteriorating Rare Earth or Ferrite
Permanent Magnet or Electro Magnet System) to
suit your separation requirements, feed width,
product size and throughput.
All magnet systems are designed
to give maximum separation performance with
either an alternating pole or continuous pole
design depending on the application.
Standard Strength Ferrite Magnets: suitable
for separating general tramp iron and contamination
such as nuts, bolts, nails, steel cans, wire
High Intensity Rare Earth Magnets: suitable
for removing general tramp iron, weakly magnetic
material, fine iron/wire and ferrous metal with
inclusions such as wood, rubber, non-ferrous
metal etc. The Rare Earth Magnet System is recommended
when a maximum level of metal removal is required.
emf - high intensity deep
field electro magnet systems are typically used
in fragmentize plants and are ideally suited
to material fed to the under side of the drum
magnet. Please contact us for a more detailed
specification of this high performance separator.
- Fragmentize metal recovery
- Wood waste recovery
- MSW metal recovery
- Aluminum extrusion recycling
- Incinerator Bottom Ash
- Glass cullet recycling
- Curbside collection separation
- Fridge Recycling Plant
- Tyre Wire Separation
Magnetic Flux Industries © 2006 - 2008. | All
Rights Reserved | DOMAIN2HOST